How to cleaning swimming pool?. Different pools have different cleaning requirements. However, regular cleaning is a requisite for all pools. No matter how cumbersome the whole process might seem, keeping a pool clean isn’t rocket science. Read further to know how you can keep your pool clean and in good condition.
Ways to cleaning swimming pool
Here’s a list of the top 10 tips to cleaning swimming pool.
10. Check the pH level
Maintaining proper pH is important to ensure that the pool is good for both the swimmers and the equipment. On a pH scale from 0 to 14, a range between 7.2 to 7.8 is safe for swimming. A testing kit or testing strips can be used to measure the pH level of a pool. On submerging the pH strips into water, they change color and this can be used to check the pH level of the pool by using the chart.
9. Remove Debris
Getting debris out of the pool is an important task as debris can clog the drains and also help algae grow. Thus all the leaves, insects, waste should be removed from the pool using a long net or a leaf skimmer. This should be done regularly as old debris can sink. This will keep the pool in good condition and is a requisite for proper hygiene.
8. Empty skimmer and pump basket
Skimmer basket can get filled with debris often and obstruct water flow. Cleaning skimmer basket is an integral part of the overall maintenance of the pool. Clogged baskets can decrease the life of the pump as it would have to pump harder. Thus, to ensure free flow of water the skimmer basket should be emptied regularly for efficiency of the filter.
7. Pool Sanitation
The people swimming in the pool release germs into the water and hence sanitation becomes inevitable. On an average, every swimmer leaves 0.14 grams of fecal matter in a swimming pool which can cause health problems like diarrhea and skin infections. Ultra Violet rays can be used for sanitation. Also, chemical substances like copper and silver ions and ozone gas can be used to sanitize the pool.
Superchlorination is extremely essential part of pool maintenance as it keeps the chlorine at the right level and kill of bacteria and other contaminants. To remove ammonia from the pool, chlorine needs a boost. Ammonia combines with chlorine to form chloramines and thus chlorine becomes ineffective. Calcium hypochlorite is commonly used for super chlorination. The frequency of super chlorination depends on various factors but should done at least once a week.
5. Water level maintenance
The water level of the pool should be checked regularly as a lot of water is lost from the pools due to several reasons such as evaporation, leaks and splashing of water. The water should not fall below the level of the skimmer, or the pump might be damaged. Also it must be kept in mind, that the pool shouldn’t be kept empty for too long even during the winters.
4. Removing stains from the pool walls
Discolored, yellow stains aren’t pleasing to the eye. The stains in a pool are usually due to a chemical reaction. There are several ways to remove swimming pool stains. The first method is the sandpaper trick which involves getting into the pool and scrubbing it off with sandpaper. Also, an emery stone can be attached to the pool cleaning pole. However, it can leave a mark after the cleaning. Another way is to add granular chlorine to the stain so that it bleaches away.
3. Maintaining filter to prevent the pool from getting dirty
There are three types of filtration systems. DE, Cartridge and Sand. All filters do require time to time cleaning for effective functioning. The frequency of cleaning a filter varies from filter to filter. But generally the filter guidelines say that a filter should be cleaned when the pressure rises above 10 psi. When the filter become clogged, the circulation of water in the pool drops.However, cleaning the filter too often can have detrimental effects as it can block the filtration process. Usually, a filter with little dirt works better than a clean filter as dirt can trap other particles that can remove other dirt.
2. Cleaning the walls
Merely cleaning the surface of the pool is not enough, the walls need to be cleaned properly with a brush to prevent it from become a breeding ground for algae and other contaminants. A tall brush or a pumice stone should be used to clean the wall. Brushing it sideways at least once a week will prevent calcium depositions on the side of the pool.
1. Vacuum the pool
To minimize algae and calcium deposit in the walls of the pool, a pool must be vacuumed at least once in a week. Proper vacuuming can also reduce the amount of chemicals added to the pool. It can be done through automatic swimming pool cleaner or any basic equipment. Also tiles of the pool should be cleaned using a stiff brush or a pumice stone to keep it clean.